Skip to product information
1 of 1
DTFPartsStore.com

JYY

JYY(B) Small Ink Pump 3W 24V for Inkjet Printer

JYY(B) Small Ink Pump 3W 24V for Inkjet Printer

Regular price $19.99 USD
Regular price Sale price $19.99 USD
Sale Sold out

JYY Small Ink Pump: Powering Your Prints with Precision!

Need a reliable way to keep your ink flowing smoothly and consistently? Look no further than the JYY Small Ink Pump—your secret weapon for high-speed printing! Whether you're running a rotary press or tackling big print jobs, this pump ensures your ink supply stays fresh, steady, and perfectly balanced.

Here’s why this little powerhouse is a must-have:

🚀 High-Speed Ink Flow, Always Ready
When the printing gets fast and the ink demands are high, the JYY Small Ink Pump steps up to the plate. It draws ink from the container and sends it straight to your printer’s ink supply system, keeping everything running smoothly, even when you’re printing at top speed.

💡 Perfect Ink Viscosity, Every Time
The key to great printing? Consistent ink flow! This pump not only keeps the ink level just right in the fountain, but it also keeps the ink stirred and blended to ensure it meets the perfect viscosity and fluidity for the best print quality. No more drying out or thickening ink—just perfect prints, every time.

🔄 Built for Continuous Action
Because inkjet printing is a marathon, not a sprint, the JYY Small Ink Pump is engineered for continuous use. While it works hard, it may eventually wear out (like all hardworking gear does). That's why regular maintenance and replacement are key to keeping your printer in top shape and your prints top-quality!

JYY Small Ink Pump Specs:

  • Model: JYY(B)-Y-10-1
  • Ink Type: Solvent Eco Inks
  • Voltage: 24V
  • Power: 3W ± 5%
  • Flow Rate: 1000ml/min
  • Weight: 63g
  • Use: Liquid & Air
  • Ink Tube Dimensions: ID 4mm, OD 6mm

The JYY Small Ink Pump is the perfect little engine that could—powering your prints with precision and efficiency. Keep your ink flowing smoothly and your prints flawless with this high-performance pump. Ready, set, print!

View full details
DTF Parts Store • Repair support

Installation & troubleshooting

View safety steps and replacement checks

Know what to check, how to prepare safely, and what your technician should verify for this ink system. Machine layouts and wiring vary by model.

JYY(B) Small Ink Pump  3W 24V for Inkjet Printer

JYY(B) Small Ink Pump 3W 24V for Inkjet Printer

Match before replacing:
Ink compatibility • size • flow direction • seal

Ink starvation, air in lines or leakage can arise from seals, tubing, pumps, dampers or capping. Confirm the cause before replacing parts.

Safety first — before access or repair

Follow the machine’s shutdown procedure. Isolate all power sources and prevent restart using the approved lockout procedure. Control stored energy and let heaters cool fully. An authorized person must verify isolation before work starts. The power button or emergency stop alone does not isolate electrical energy.

Electrical work, heaters and safety controls require a qualified technician. Never work inside a live cabinet, bypass guards or safety devices, or reach into moving rollers or fans. Follow the machine manual and powder/ink safety data sheet for required protective equipment.

1

Stop & isolate

Shut down, isolate supplies, prevent restart, control stored energy and verify the machine is safe to access.

2

Inspect & match

Follow the printer’s shutdown and ink-system service procedure. Use compatible gloves and eye protection, contain drips, and check visible leaks or air in the lines without touching the nozzle face.

3

Replace correctly

Use a trained technician and the exact printer service procedure for ink isolation, component replacement and priming. Preserve line routing and flow direction. Never force fluid into a printhead or substitute an unapproved solvent.

4

Verify operation

Check for leaks and complete the printer’s specified prime, nozzle check and calibration. Stop if ink reaches electrical connectors.

Stop and get help if…

You find burned wiring, repeated breaker trips, damaged safety controls, uncontrolled heating, ink on electronics, a mismatch in ratings, or a diagram that does not match the machine. Keep the machine out of service until a qualified technician resolves the fault.

What to send for model-specific help

Send the machine model and serial label, a clear photo of the original component and its markings, your symptom, and the relevant service-manual page. Take internal photos only after safe isolation by an authorized person. Do not unplug or move wires just to photograph them.

Need the procedure for your machine?

Send your model and original part photos so we can help confirm compatibility and the correct service reference.

Get part-specific help →

This is a service planning overview. Use the exact machine and component manuals for removal, wiring, torque settings, calibration and commissioning. It is not a model-specific wiring diagram.

Energy isolation reference